Widerruf
Einklappbarer Inhalt
My design has a small bubble or appears to be missing color in one spot. Is it defective?
This is not a defect. The design has simply started to separate slightly from the backing film in that area. This can occasionally happen and is completely harmless. The design separates entirely from the backing film during ironing anyway, so it does not affect the final result.
What should I do if the design starts to lift after washing?
If parts of the design lift slightly after washing, there is no need to worry. Simply place a sheet of parchment paper over the design and iron the affected areas again. The heat will reactivate the adhesive. Make sure to applysufficient pressureso the design bonds securely with the fabric again.
Which fabric works best for iron-on transfers?
Smooth cotton fabric is the best choice, as it allows the design to bond securely and last longer. Ribbed fabrics can also work, although their textured surface may slightly affect the design’s long-term durability.
For maximum longevity, smooth, untextured cotton is your best option.
How do I achieve the best results with my iron-on transfer?
The secret to a perfect iron-on transfer comes down to three factors: heat, pressure, and time. Only when all three are properly balanced will your design bond securely and smoothly with the fabric.
Be sure to follow the recommended ironing time and avoid setting your iron too low, as insufficient heat can prevent the adhesive from activating properly. Combined with even pressure, this will give you a durable, professional-looking result.
How hot should the iron be, and why does the right temperature matter?
Preheat your iron to a medium-to-high setting. The ideal temperature is approximately 150–170°C, usually the cotton setting.
Within this temperature range, the transfer adheres securely and retains its shape. Be sure to turn off the steam function. Dry heat activates the adhesive, allowing it to bond properly with the fabric.
Why is it important to apply pressure when ironing?
Applying the right amount of pressure allows the heated adhesive to bond evenly with the fabric, ensuring the design stays securely in place.
Just as a sticker only adheres properly when pressed firmly, an iron-on transfer also needs consistent, even pressure.
Medium pressure is ideal: firm enough to apply the design smoothly, but gentle enough to protect the fabric. If you press down firmly but comfortably with your iron, you are doing it right!
What is the recommended ironing time?
Press your design for approximately 25–30 seconds using the middle, widest part of your iron.
This gives the heat and pressure enough time to bond the design securely with the fabric.